Noteworthy changes in release 4.24 (2018-08-14) =============================================== * Improvements * Implemented decoding of kvm vcpu exit reason (-e kvm=vcpu option), requires Linux kernel version 4.16.0 or higher. * Implemented decoding of KVM_SET_CPUID2 and KVM_GET_*_CPUID ioctl commands. * Enhanced decoding of corner cases of SO_LINGER, SO_PEERCRED, and PACKET_STATISTICS getsockopt options. * Wired up io_pgetevents and rseq syscalls on hppa, microblaze, mips, powerpc, and s390. * Updated lists of AUDIT_*, BPF_*, IFA_*, IFLA_*, RTA_*, RTPROT_*, TCP_*, TRAP_*, and UDP_* constants. * Updated lists of ioctl commands from Linux 4.18. * Bug fixes * Fixed decoding of Q_XGETQSTAT on non-native personalities. * Fixed race condition in aio test. * Fixed build with Bionic libc. * Fixed build with glibc-2.28. * Fixed build in exotic systemd-nspawn based environments. * Fixed build on s390 with kernel headers that do not contain Linux commit v3.10-rc1~201^2~11. * Fixed insufficient buffer size used for network interface name printing, that previously led to assertions on attempts of printing interface names that require quoting, for example, names longer than 4 characters in -xx mode (addresses RHBZ bug #2028146). Noteworthy changes in release 4.23 (2018-06-14) =============================================== * Changes in behaviour * On x32 personality, 64-bit syscalls (such as readv) are now shown with "#64" suffix instead of "64:" prefix. Unlike the old names, these new names can be used in syscall qualification expressions. * Changed error number output format: error numbers are consistently printed as "-1 ECONST (Error description)" for known errors and as "-1 (errno 123)" for unknown errors, regardless of -e raw qualification settings. One can specify -X raw for displaying raw error numbers unconditionally. * Unfetchable addresses inside arrays are now printed as comments. * Obsolete IA-32 mode syscall names are no longer printed on ia64. * Improvements * Implemented libdw backend for -k option, configured at build time using --with-libdw option. Whether -k option is compiled is now configured at build time using --enable-stacktrace option. * Added -X option for configuring xlat output formatting (addresses Debian bug #692915). * Added support for personality designation ("64", "32", or "x32") to syscall qualifications in -e trace expressions. * Implemented injection of syscalls with no side effects as an alternative to injection of an invalid syscall (-e inject=SET:syscall= expression). * Improved support for reproducible builds (addresses Debian bug #896016). * Implemented decoding of BPF_PROG_QUERY and BPF_RAW_TRACEPOINT_OPEN bpf syscall commands. * Implemented decoding of INOTIFY_IOC_SETNEXTWD and PERF_EVENT_IOC_* ioctl commands. * Implemented decoding of PR_GET_SPECULATION_CTRL and PR_SET_SPECULATION_CTRL prctl syscall options. * Enhanced decoding of bpf, getsockopt, setsockopt, and socket syscalls. * Enhanced decoding of NETLINK_KOBJECT_UEVENT and NETLINK_ROUTE protocols. * Enhanced decoding of *_DIAG_MEMINFO netlink attributes. * Enhanced decoding of BTRFS_*, FS_IOC_*, SIOCGIFHWADDR, and SIOCSIFHWADDR ioctl commands. * Enhanced decoding of AF_BLUETOOTH socket addresses. * Implemented decoding of io_pgetevent syscall. * Wired up rseq syscall. * Updated lists of ADJ_*, BPF_*, BPF_F_*, BPF_PROG_TYPE_*, ETH_P_*, FPE_*, IFF_*, IPPROTO_*, MAP_*, MS_*, MSG_*, NETLINK_*, PACKET_*, PROT_*, SCTP_*, SECCOMP_FILTER_FLAG_*, SEGV_*, SEM_*, SHM_*, SW_*, V4L2_CID_*, V4L2_CTRL_CLASS_*, and V4L2_PIX_FMT_* constants. * Updated lists of ioctl commands from Linux 4.17. * Bug fixes * Fixed decoding of msgtyp argument of msgrcv syscall. * Fixed fallback definitions for F_*, MCL_*, MSG_ZEROCOPY, SI_*, and SOL_SOCKET constants. * Fixed -e trace=%pure expression on mips. Noteworthy changes in release 4.22 (2018-04-05) =============================================== * Changes in infrastructure * The mailing list was moved to strace-devel@lists.strace.io. * SourceForge git repository (https://sourceforge.net/p/strace/code/ci/master/tree/) is no longer maintained. Please use GitLab (https://gitlab.com/strace/strace/) or GitHub (https://github.com/strace/strace/) repository instead. * Changes in behaviour * When printing string data, '8' and '9' following an octal escape sequence no longer lead to unabbreviated octal escape sequence output, as they used to do. * Angle brackets are now printed as octal number escape sequences in the output of paths associated with file descriptors. * Data dump for write syscalls (-e write) is performed regardless of successfulness of these syscall (addresses Debian bug #436284). * -r and -t options are now affect output independently. Previously, -r option led to ignoring of the -t option (addresses Debian bug #466195). * Improvements * Implemented delay injection (-e inject=SET:delay_enter= and -e inject=SET:delay_exit= options). * Added -A option for opening output files in append mode (addresses Debian bug #528488). * IPv6 addresses shown in socket information in -yy mode are now printed in brackets. * Enhanced decoding of bpf, prctl and ptrace syscalls. * Enhanced decoding of BTRFS_IOC_INO_PATHS, BTRFS_IOC_LOGICAL_INO, and PTP_* ioctl commands. * Enhanced NETLINK_ROUTE protocol decoding. * Updated lists of signal codes. * Updated lists of BPF_*, BTN_*, ETH_P_*, INET_DIAG_BC_*, KEY_*, POLL*, RWF_*, SCHED_FLAG_*, SCTP_* and error constants. * Implemented block/character device number printing in -yy mode. * Known pixel/SDR format names are printed as comments for pixelformat fields in v4l2 structures. * Enhanced decoding of kern_features syscall. * Enhanced NETLINK_NETFILTER netlink protocol decoder. * Optimized handling of large number of tracees. * Improved wall clock time measurement in syscall count statistics (-c -w option). * Extended the range of allowed values in -e inject=...:retval= expression. * Added i18n support. * Updated lists of ioctl commands from Linux 4.16. * Enhanced manual page. * Bug fixes * Fixed build on m68k. * Fixed v4l2 pixelformat decoding on big-endian architectures. * Fixed -O option. Noteworthy changes in release 4.21 (2018-02-13) =============================================== * Changes in behaviour * Warning is now issued when -F option is used. * Warning is now issued when a tracee with unsupported personality is attached. * Unknown syscall numbers are now printed in hexadecimal form. * Improvements * Implemented decoding of netlink descriptor attributes as file descriptors. * Implemented decoding of hugetlb page size selection flags. * Implemented decoding of BPF_PROG_TEST_RUN, BPF_PROG_GET_NEXT_ID, BPF_MAP_GET_NEXT_ID, BPF_PROG_GET_FD_BY_ID, BPF_MAP_GET_FD_BY_ID, and BPF_OBJ_GET_INFO_BY_FD commands of bpf syscall. * Enhanced decoding of get_thread_area, memfd_create, modify_ldt, perf_event_open, reboot, s390_guarded_storage, s390_pcio_mmio_read, s390_pci_mmio_write, s390_runtime_instr, s390_sthyi, set_thread_area, and shmget syscalls. * Implemented decoding of KVM_* and DM_LIST_DEVICES ioctl commands. * Implemented decoding of riscv_flush_icache syscall. * Enhanced decoding of getsockopt and setsockopt syscalls for SOL_NETLINK level. * Enhanced decoding of BPF_MAP_CREATE command of bpf syscall. * Print values returned by mq_open syscall and first arguments of mq_getsetattr, mq_notify, mq_timedreceive, and mq_timedsend syscalls as file descriptors. * Added decoding of get_tls syscall on arm. * Added -e trace=%pure option for tracing system calls with no arguments that never fail. * Updated lists of IPV6_*, MAP_*, MEMBARRIER_CMD_*, MSG_*, NT_*, PKEY_*, SHM_*, and TCP_* constants. * Added manual page for the strace-log-merge command. * Updated lists of ioctl commands from Linux 4.15. * Implemented biarch support for s390x. * Implemented an optional support for symbol demangling in strace -k output (activated by --with-libiberty configure option). * Information about availability of demangling and reliable personality decoding (on architectures with multiple personalities) is now available in strace -V output. * Added decoding of pkey_alloc, pkey_free, and pkey_mprotect syscalls on powerpc and powerpc64. * Enhanced manual page. * Bug fixes * Fixed multi-personality support in cross builds. * Added mq_getsetattr, mq_notify, mq_open, mq_timedreceive, and mq_timedsend syscalls to %desc tracing set. * Fixed path tracing support for mmap syscalls with indirect arguments and for old select syscall. * Fixed decoding of arm-specific (__ARM_NR_*) syscalls. * Fixed open mode flags decoding. * Fixed corner cases in handling of strace -ff -ttt logs by strace-log-merge. * Error counts that exceed one billion are now printed correctly in call summary output. * Fixed call summary header for x32 personality. * Changes of tracee personalities are reported more reliably. * Fixed the case when strace attaches to a tracee being inside exec and its first syscall stop is syscall-exit-stop instead of syscall-enter-stop, which messed up all the syscall state tracking. * Fixed printing of higher 32 bits of the return value for x32 personality. * Portability * A C compiler that supports "for" loop initial declarations is now required. * Inability to configure multiple personality support on architectures where multiple personalities are supported leads to configuration failure during build now. Use --enable-mpers=check to revert to the old behaviour. * Build-time requirement for the mpers support has been lowered from gawk 4 to gawk 3. * Removed incomplete and non-functional support for the CRIS architecture. * Removed incomplete and unused support for IA-32 mode on the IA-64 architecture. Noteworthy changes in release 4.20 (2017-11-13) =============================================== * Improvements * Implemented decoding of NETLINK_NETFILTER netlink message types and flags. * Implemented decoding of SECCOMP_GET_ACTION_AVAIL operation of seccomp syscall. * Updated lists of ARPHRD_*, BPF_*, ETH_P_*, LOOP_*, MADV_*, MEMBARRIER_CMD_*, MFD_*, SECCOMP_*, SO_*, SOL_*, TCP_*, and UFFD_FEATURE_* constants. * Added decoding of statx syscall on hppa. * Updated lists of ioctl commands from Linux 4.14. * Bug fixes * Fixed powerpc personality support on powerpc64. Noteworthy changes in release 4.19 (2017-09-05) =============================================== * Changes in behaviour * Changed formatting of personality names on tile architecture in order to make it in line with other multi-personality architectures. * Changed field output order in struct v4l2_requestbuffers to improve in/out field formatting. * Changed handling of multiple signal= specifications in an injection expression: multiple specification now leads to error instead of implicit usage the last specification. * Improvements * Enhanced decoding of optlen argument of getsockopt syscall. * Enhanced decoding of SO_LINGER option of getsockopt and setsockopt syscalls. * Enhanced decoding of SO_PEERCRED option of getsockopt syscall. * Enhanced decoding of IP_ADD_MEMBERSHIP, IP_DROP_MEMBERSHIP, IPV6_ADD_MEMBERSHIP, IPV6_DROP_MEMBERSHIP, IPV6_JOIN_ANYCAST, IPV6_LEAVE_ANYCAST, MCAST_JOIN_GROUP, and MCAST_LEAVE_GROUP options of setsockopt syscall. * Enhanced decoding of KEYCTL_DH_COMPUTE operation of keyctl syscall (KDF parameters decoding). * Implemented decoding of KEYCTL_RESTRICT_KEYRING operation of keyctl syscall. * Enhanced decoding of UFFDIO_API ioctl command. * Enhanced decoding of BPF_PROG_LOAD, BPF_MAP_CREATE, BPF_MAP_LOOKUP_ELEM, and BPF_MAP_GET_NEXT_KEY commands of bpf syscall. * Implemented decoding of linux socket filter programs specified for SO_ATTACH_FILTER and SO_ATTACH_REUSEPORT_CBPF socket options. * Implemented decoding of inet_diag_req_v2, inet_diag_req_compat, packet_diag_msg, and smc_diag_msg netlink attributes of NETLINK_SOCK_DIAG. * Implemented NETLINK_SELINUX protocol specific decoding. * Implemented decoding of netlink message ack flags. * Implemented decoding of nlmsgerr netlink attributes. * Implemented basic protocol specific decoding of NETLINK_CRYPTO. * Implemented decoding of crypto_user_alg netlink attributes of NETLINK_CRYPTO. * Implemented basic protocol specific decoding of addr, addrlabel, dcb, link, mdb, neigh, neightbl, netconf, nsid, route, rule, tc, and tca messages of NETLINK_ROUTE. * Implemented decoding of NETLINK_KOBJECT_UEVENT messages. * Improved handling of unexpected tracees (the ones that cloned with CLONE_PARENT/CLONE_PTRACE or called PTRACE_TRACEME on themselves): they are now PTRACE_DETACH'ed instead of PTRACE_CONT'ed. * Updated lists of BPF_*, KEY_*, RWF_*, SCM_*, SO_*, and *_MAGIC constants. * Added decoding of arch_prctl syscall on x86. * Added decoding of seccomp, bpf, userfaultfd, membarrier, mlock2, copy_file_range, preadv2, pwritev2, and statx on alpha. * Added decoding of statx syscall on microblaze. * Added decoding of s390_guarded_storage syscall on s390. * Updated lists of ioctl commands from Linux 4.13. * Enhanced manual page. * Bug fixes * Fixed printing of group_req structure on non-native personalities. * Fixed output formatting of blkpg_ioctl_arg, dm_name_list, and iocb structures. * Fixed formatting of nul-terminated strings which have kernel-imposed size limit. * Fixed printing of paths that hit PATM_MAX limit in order to match kernel's behaviour. * Fixed build warnings on Android mips64. * Fixed unused function "is_negated_errno" build warning when built with clang. * Fixed syscall number and arguments retrieval behaviour on sparc64 and mips o32 after prctl(PR_SET_DUMPABLE, 0) makes PTRACE_PEEKTEXT impossible to use if Linux kernel has commit v4.10-rc1~114^2~2. * Fixed path tracing for execveat, symlink, symlinkat, inotify_add_watch, and inotify_init syscalls. * Fixed personality switch printing on sparc64 and risc-v. Noteworthy changes in release 4.18 (2017-07-05) =============================================== * Improvements * Implemented decoding of SCM_TIMESTAMP* control messages. * Implemented decoding of netlink NLMSG_DONE messages. * Implemented decoding of netlink generic nlmsg_type and nlmsg_flags. * Implemented decoding of NETLINK_AUDIT, NETLINK_NETFILTER, NETLINK_ROUTE, NETLINK_SELINUX, NETLINK_SOCK_DIAG, and NETLINK_XFRM message types. * Implemented decoding of NETLINK_GENERIC protocol families. * Implemented basic protocol specific decoding of AF_INET, AF_INET6, AF_NETLINK, AF_PACKET, AF_SMC, and AF_UNIX messages of NETLINK_SOCK_DIAG. * Implemented basic decoding of netlink attributes. * Implemented basic protocol specific decoding of AF_INET, AF_NETLINK, AF_PACKET, AF_SMC, and AF_UNIX netlink attributes of NETLINK_SOCK_DIAG. * Implemented decoding of inet_diag_msg, netlink_diag_msg, and unix_diag_msg netlink attributes of NETLINK_SOCK_DIAG. * Updated lists of ARPHRD_*, KEYCTL_*, NDIAG_SHOW_*, RTM_*, SCM_*, SCTP_*, SO_*, V4L2_*, and prctl ARCH_* constants. * Updated lists of ioctl commands from Linux 4.12. * Bug fixes * In interactive mode (-I2), those signals that were blocked at startup will remain blocked for the whole period of strace execution. * strace no longer resets SIGCHLD handler in tracees to the default action. * When traced command is terminated by a blocked signal, strace unblocks that signal to ensure its own termination with the same signal. * Fixed corner cases in decoding of old sigaction syscall. * Fixed build with old kernel headers on mips. * Fixed build on aarch64 and tile with glibc >= 2.26. * Fixed build on arc and nios2. Noteworthy changes in release 4.17 (2017-05-24) =============================================== * Changes in command line syntax * Syscall classes specified in -e trace= option now have % prefix (like -e trace=%process). Old style class names without leading % are still supported, but considered deprecated now. * Improvements * Optimized syscall filtering. * Improved representation of timestamps. * Enhanced decoding of sched_setattr syscall. * Added -e trace=%stat option for tracing variants of stat syscall. * Added -e trace=%lstat option for tracing variants of lstat syscall. * Added -e trace=%fstat option for tracing variants of fstat and fstatat syscalls. * Added -e trace=%%stat option for tracing syscalls used for querying file status information (stat, lstat, fstat, fstatat, statx, and their variations). * Added -e trace=%statfs option for tracing statfs, statfs64 and statvfs syscalls. * Added -e trace=%fstatfs option for tracing fstatfs, fstatfs64 and fstatvfs syscalls. * Added -e trace=%%statfs option for tracing syscalls used for querying file system statistics information (statfs-like, fstatfs-like and ustat). * Added -e trace=/regex option for filtering syscalls using regular expressions. * Added support for prepending of question mark before syscall qualification in -e trace expressions in order to suppress error in case no syscalls matched the provided qualification. * Implemented decoding of signal mask in rt_sigreturn syscall on alpha, arc, arm, avr32, bfin, cris, hppa, m68k, metag, microblaze, mips, nios2, or1k, powerpc, powerpc64, riscv, sh, sh64, sparc, sparc64, tile, x86, and xtensa architectures. * Implemented decoding of statx syscall. * Implemented decoding of NS_* ioctl commands. * Implemented decoding of the remaining V4L2_BUF_TYPE_* types. * Implemented decoding of VIDIOC_[SG]_TUNER ioctl commands. * Implemented decoding of NLMSG_ERROR netlink messages. * Improved decoding of BPF_PROG_ATTACH command of bpf syscall. * Improved decoding of misplaced parts in DM_* ioctl commands. * Updated lists of ioctl commands from Linux 4.11. * Bug fixes * Fixed decoding of flags argument of preadv2 and pwritev2 syscalls on x32. * Fixed the number of arguments and tracing flags of alpha specific syscalls. * Fixed decoding of old sigsuspend syscall on alpha, cris, mips, powerpc, powerpc64, sh, sh64, sparc, and sparc64. * Fixed decoding of sgetmask and ssetmask syscalls on 64-bit architectures. * Fixed decoding of netlink messages received within struct msghdr. * Worked around a bug in miscompiled aarch64 kernels leading to the 3rd argument of sched_getattr syscall being not quite 32-bit. * Fixed corner cases of printing inaccessible times argument of utimes and futimesat syscalls. Noteworthy changes in release 4.16 (2017-02-14) =============================================== * Improvements * Implemented syscall return value injection (-e inject=SET:retval= option). * Implemented signal injection (-e inject=SET:signal= option). * Implemented decoding of SUID_DUMP_* constants in PR_[GS]ET_DUMPABLE. * Implemented decoding of all SG_* ioctl commands. * Implemented decoding of ustat syscall. * Implemented decoding of BPF_OBJ_PIN, BPF_OBJ_GET, BPF_PROG_ATTACH, and BPF_PROG_DETACH commands of bpf syscall. * Enhanced decoding of sg_io_hdr and sg_io_v4 structures. * Enhanced decoding of get_robust_list, getrandom, io_submit, set_robust_list syscalls. * Enhanced decoding of entities of kernel long type on x32 and mips n32 ABIs. * Updated lists of IP_*, IPV6_*, and LOOP_* constants. * Updated lists of ioctl commands from Linux 4.10. * Added decoding of recently added syscalls on avr32, microblaze, ppc, and ppc64. * Bug fixes * Fixed pathmatch of oldselect syscall on 64-bit architectures. * Fixed decoding of mmap2 syscall on s390 when arguments are not available. * Fixed decoding of kexec_file_load, mprotect, pkey_mprotect, prctl, preadv*, and pwritev* syscalls on x32. * Fixed printing of string arguments of getxattr and setxattr syscalls when -s option is used to limit the printed string size. * Fixed decoding of ifconf, ifreq, and loop_info structures on non-native personalities. * Fixed decoding of SG_* and LOOP_* ioctl commands. * Fixed build on mips with musl libc. * Fixed cross-building of ioctlsort. * Applied minor formatting fixes to the manual page. Noteworthy changes in release 4.15 (2016-12-14) =============================================== * Changes in behavior * Time stamps are now printed according to ISO 8601. * Changed output format of val3 parameter of futex FUTEX_WAKE_OP operation. * The last argument of mincore, sched_getaffinity, and sched_setaffinity syscalls is now formatted as an array. * Improvements * Implemented syscall fault injection (-e fault=... option). * Implemented decoding of DM_* ioctl commands. * Implemented decoding of attr parameter of perf_event_open syscall. * Implemented decoding of pkey_alloc, pkey_free, and pkey_mprotect syscalls. * Implemented dumping of mq_timedsend and mq_timedreceive syscalls. * Implemented decoding of PR_SET_FP_MODE and PR_GET_FP_MODE operations of prctl syscall. * Implemented PTRACE_GETREGS API support on m68k. * Updated lists of ARCH_*, BPF_*, BTRFS_*, FALLOC_*, MS_*, *_MAGIC, and V4L2_* constants. * Updated lists of ioctl commands from Linux 4.9. * Added decoding of recently added syscalls on arc, x32, and xtensa. * Enhanced manual page. * Bug fixes * Fixed corner cases in decoding of exit, exit_group, futimesat, getgroups, getresuid, init_module, inotify_init1, kcmp, kexec_load, lookup_dcookie, mq_getsetattr, mq_notify, mq_open, mq_timedreceive, mq_timedsend, name_to_handle_at, prctl, process_vm_readv, process_vm_writev, setfsuid, setgroups, setns, unshare, and utimes syscalls. * Fixed handling of verbose flag in printing of controls array of struct v4l2_ext_controls. * Fixed omission of field names in the output of capability, sigaction, sigevent, statfs, timespec, timeval, and utimbuf structures. * Fixed printing of unknown syscalls in siginfo structure. * Fixed decoding of ioctl constants on m68k. * Fixed cris architecture support. * Fixed cross build when host compiler does not support the same set of warning flags as the cross compiler. * Fixed build on SLE10 and SLE11. Noteworthy changes in release 4.14 (2016-10-04) =============================================== * Changes in behavior * When using -p option without a command and no processes has been attached, strace exits with exit status 1. * Improvements * Added printing of the mode argument of open and openat syscalls when O_TMPFILE flag is set. (Addresses Fedora bug #1377846). * Enhanced -e abbrev=set, -e raw=set, and -e verbose=set. * Enhanced decoding of futex, keyctl, quotactl, timerfd_settime, and aio family syscalls. * Implemented fetching of the 7th subcall argument on mips o32. * Updated lists of BPF_*, ETH_P_*, KEXEC_ARCH_*, SCTP_*, TCP_*, and *_MAGIC constants. * Updated lists of ioctl commands from Linux 4.8. * Added decoding of new syscalls on sh and sh64. * Added RISC-V architecture support. * Bug fixes * Marked io_setup and io_destroy as memory mapping related syscalls. * Fixed leakage of placeholder descriptors to tracees. * Fixed printing of mode_t, umode_t, and umask types. * Fixed decoding of iovec arrays without a limit on total data size. * Fixed decoding of fadvise64, fallocate, futex, keyctl, quotactl, readahead, and ipc family syscalls. * Fixed decoding of invalid syscalls mapped to indirect subcalls. * Fixed decoding of struct btrfs_ioctl_vol_args_v2 on non-native personalities. * Fixed decoding of PTRACE_DETACH on sparc and sparc64. * Fixed decoding of struct stat64 on sparc64. * Fixed decoding of uid and gid-related syscalls on sparc64. * Fixed decoding of the forth argument of semctl syscall on sparc64. * Fixed values of tty ioctl constants on sparc64. * Fixed sparc personality support on sparc64. Noteworthy changes in release 4.13 (2016-07-26) =============================================== * Improvements * Implemented a general netlink socket parser. * Enhanced decoding of socket addresses. * Enhanced decoding of cmsghdr, msghdr, and mmsghdr structures. * Enhanced decoding of accept, accept4, bind, getpeername, getsockname, ipc, recvfrom, recvmsg, recvmmsg, sendto, sendmmsg, and socketcall syscalls. * Updated lists of AF_*, BPF_MAP_TYPE_*, KEY_*, KEYCTL_*, RWF_*, SS_*, and *_MAGIC constants. * Updated lists of ioctl commands from Linux 4.7. * Bug fixes * Fixed decoding of pid_t argument of prlimit64 syscall. * Fixed sign extension issues in the parser of struct rusage. * Fixed race condition in decoding of timeout argument of recvmmsg and rt_sigtimedwait syscalls. * Fixed build with fresh linux kernel headers. Noteworthy changes in release 4.12 (2016-05-31) =============================================== * Improvements * Implemented simultaneous use of -p option and tracing of a command. (addresses Debian bug #549942). * Implemented caching of netlink conversations to reduce amount of time spent in decoding socket details in -yy mode. * Implemented -yy mode decoding of protocol:portid pairs associated with netlink socket descriptors. * Implemented decoding of copy_file_range, preadv2, and pwritev2 syscalls. * Implemented dumping of preadv, preadv2, pwritev, pwritev2, and vmsplice syscalls. * Implemented decoding of BTRFS_* and UFFDIO_* ioctl commands. * Enhanced decoding of BLK*, EVIOC*, RTC_*, and VIDIOC_* ioctl commands. * Enhanced decoding of fstatfs, fstatfs64, get_mempolicy, getdents, getdents64, getgroups, getpriority, kill, mbind, migrate_pages, mknod, mknodat, personality, poll, ppoll, quotactl, rt_sigpending, rt_sigqueueinfo, rt_sigtimedwait, rt_tgsigqueueinfo, sched_getaffinity, sched_setaffinity, seccomp, set_mempolicy, setgroups, setpriority, statfs, statfs64, tgkill, waitid, and xattr family syscalls. * Enhanced decoding of getxpid, getxuid, and getxgid syscalls on alpha. * Enhanced decoding of pipe syscall on alpha, ia64, mips, sh, and sparc. * Added decoding of bind, listen, and setsockopt direct syscalls on sparc. * Added decoding of osf_statfs64 and osf_fstatfs64 syscalls on alpha. * Added decoding of fadvise64 and fadvise64_64 on s390. * Updated lists of AF_*, BPF_MAP_TYPE_*, CLONE_*, EPOLL*, IPV6_*, MADV_*, MSG_*, PTRACE_*, SEGV_*, SO_*, SOL_*, *_MAGIC, and quotactl constants. * Updated lists of ioctl commands from Linux 4.6. * Bug fixes * Fixed build on arc, metag, nios2, or1k, and tile architectures. * Fixed decoding of 32-bit times syscall return value on 64-bit architectures. * Fixed decoding of mlock2 syscall on sparc. * Fixed decoding of osf_shmat syscall on alpha. * Fixed decoding of syscalls unknown to the kernel on s390/s390x. (addresses Debian bug #485979 and Fedora bug #1298294). * Fixed decoding of preadv syscall in case of short read. * Fixed decoding and dumping of readv syscall in case of short read. * Fixed dumping of recvmsg and recvmmsg syscalls in case of short read. * Fixed decoding of mincore syscall's last argument. * Fixed remaining errors in mapping between syscall numbers and numbers of syscall arguments. * Applied various fixes to strace-graph script. Noteworthy changes in release 4.11 (2015-12-21) =============================================== * Changes in behavior * Some syscalls have different names depending on architecture and personality. In these cases, syscall filtering and printing now consistently uses the names that match corresponding __NR_* kernel macros of the tracee's architecture and personality. * Added strace prefix to all diagnostic messages. * Improvements * Enhanced and extended test suite. * Implemented reliable tracing of processes whose personality differs from the personality of strace, fixed decoding of 32-bit personality syscalls on 64-bit architectures. * When some data referenced by syscall arguments is irrelevant or cannot be read from tracee's memory, strace now prints its address consistently. * When a syscall is restarted using restart_syscall mechanism, strace now shows the syscall name on architectures that expose this information. * Print values returned by epoll_create1, eventfd, eventfd2, fanotify_init, inotify_init1, perf_event_open, pipe, pipe2, signalfd, signalfd4, socket, socketpair, timerfd, and timerfd_create syscalls, as well as F_DUPFD and F_DUPFD_CLOEXEC fcntl commands, as file descriptors. * Optimized decoding of indirect socket syscalls. * Implemented decoding of nanoseconds along with seconds in stat family syscalls (addresses Fedora bug #1251176). * Implemented decoding of struct statfs.f_flags in statfs syscall. * Implemented decoding of siginfo_t.si_syscall and siginfo_t.si_arch in SIGSYS signal. * Implemented decoding of indirect syscall on mips o32. * Implemented decoding of IPPROTO_IP control messages. * Implemented decoding of setsockopt syscall multicast arguments. * Enhanced decoding of struct sigevent. * Enhanced decoding of block, loop, mtd, ptp, rtc, SG_IO, socket, tty, and v4l2 ioctl syscall arguments. * Enhanced decoding of epoll_create, fcntl, fcntl64, futex, getdents, getdents64, getsockopt, io_*, mount, msgctl, prctl, quotactl, recvfrom, sendfile, setsockopt, and shmctl syscalls. * Implemented decoding of bpf, execveat, ioperm, iopl, kcmp, kexec_file_load, lookup_dcookie, membarrier, memfd_create, mlock2, name_to_handle_at, open_by_handle_at, sched_getattr, sched_setattr, and userfaultfd syscalls. * Updated lists of AF_*, EPOLL_*, FALLOC_FL_*, F_*, INPUT_PROP_*, IPPROTO_*, IPV6_*, IP_*, KEY_*, LOCK_*, MNT_*, MS_*, PACKET_*, PERF_FLAG_*, PF_*, PR_*, PTRACE_O_*, RENAME_*, SCTP_*, SECBIT_*, SO_*, TCP_*, and siginfo_t constants. * Added Nios II architecture support. * Added new syscall entries to match Linux 4.4. * Bug fixes * Fixed potential short read of strings from tracee's memory. * Fixed -qq option in conjunction with -o option. * Fixed filtering of syscalls. * Fixed decoding of ioctl syscall command on aarch64 and 32-bit architectures with 64-bit aligned structures. * Fixed decoding of eventfd2, epoll_create1, signalfd4, and sync_file_range2 syscall flags arguments. * Fixed decoding of 4th argument of clock_nanosleep syscall. * Fixed decoding of getpagesize syscall on m68k. * Fixed decoding of getrandom and seccomp syscalls on aarch64. * Fixed decoding of timezone argument of gettimeofday and settimeofday * syscalls. * Fixed decoding of offset argument of mmap2 syscall on arm, sparc, and sparc64. * Fixed decoding of pipe syscall on alpha and mips. * Fixed decoding of pipe2 syscall on ia64, sh, sparc, and sparc64. * Fixed decoding of signal mask argument of pselect6 syscall on x32. * Fixed decoding of signal mask of rt_sigreturn syscall on aarch64, m68k, and x32. * Fixed decoding of 4th argument of semctl indirect syscall. * Fixed decoding of sa_restorer and sa_mask of sigaction syscall on m68k. * Fixed decoding of statfs64 and fstatfs64 syscalls on arm eabi. * Fixed decoding of struct dirent on x32. * Fixed decoding of times syscall return value on mips n32 and x32. * Fixed decoding of path argument of umount2 syscall (addresses Debian bug #785050). * Worked around a kernel bug in tracing privileged executables. * Fixed various errors in mapping between syscall numbers and associated information like the number of syscall arguments, the name of syscall, and syscall decoder. Noteworthy changes in release 4.10 (2015-03-06) =============================================== * Improvements * Added -yy option to print protocol and address information associated with socket descriptors. * Extended "-e read=set" and "-e write=set" options to cover sendmsg, recvmsg, sendmmsg, and recvmmsg syscalls. * Implemented full 32-bit decoding of ioctl commands (addresses Debian bug #692913 and Fedora bug #902788). * Implemented PTRACE_GETREGS API support on ia64. * Implemented PTRACE_GETREGS API support on mips. * Implemented PTRACE_GETREGSET API support on s390/s390x. * Implemented decoding of getrandom and seccomp syscalls. * Implemented full decoding of 64-bit capability sets. * Implemented decoding of all prctl commands. * Implemented decoding of parametrized ioctl commands. * Implemented decoding of evdev ioctl commands. * Implemented decoding of v4l ioctl commands. * Implemented decoding of SG_IO v4 ioctl commands. * Implemented decoding of FIFREEZE/FITHAW/FITRIM ioctl commands. * Implemented decoding of FALLOC_FL_* fallocate flags. * Implemented decoding of rt_sigreturn signal mask on aarch64, x32, and x86_64. * Enhanced socket decoder to support bluetooth sockets. * Enhanced decoding of unlisted ioctl commands. * Enhanced decoding of getsockopt and setsockopt syscall. * Enhanced decoding of sysinfo syscall. * Enhanced decoding of struct cmsghdr. * Enhanced decoding of wait status. * Enhanced aio support on non-x86 architectures by using external libaio.h. * Added O_TMPFILE to the list of recognized open mode flags. * Updated the list of filesystem type constants that is used in decoding statfs family syscalls. * Updated lists of CAP_*, PR_*, PTRACE_*, SCHED_*, SO_*, SOL_*, SWAP_FLAG_*, and TFD_* constants. * Updated lists of signal constants from Linux 3.19. * Updated lists of errno constants from Linux 3.19. * Updated lists of ioctl commands from Linux 3.9. * Added new syscall entries to match Linux 3.19. * Bug fixes * Fixed various errors in mapping between syscall numbers and associated information like the number of syscall arguments, the name of syscall, and syscall decoder. * Fixed quoting issues in printing descriptors, filenames, network interface names, struct utsname members, device/volume names of BLK* ioctl commands. * Fixed uid_t/git_t decoding. * Fixed potential out-of-bounds read issues in getdents/getdents64 decoders. * Fixed potential open flags truncation on some architectures. * Fixed decoding of struct ifreq.ifr_name. * Fixed decoding of SIOCSIFNAME ioctl command. * Fixed decoding of RENAME_* renameat2 flags. * Fixed decoding of UTIME_NOW/UTIME_OMIT timeval structures. * Fixed decoding of indirect ipc subcalls on some architectures. * Fixed decoding of fanotify_mark syscall on 32-bit architectures. * Fixed decoding of 32-bit stat structures on 64-bit architectures. * Fixed decoding of 32-bit struct cmsghdr on 64-bit architectures. * Fixed decoding of 32-bit preadv/pwritev offset on 64-bit architectures. * Fixed decoding of sigreturn/rt_sigreturn signal mask on ia64, ppc, ppc64, sparc, sparc64, mips, and s390. * Fixed instruction pointer output (-i option) on architectures that support several personalities. * Fixed behaviour of "-e read=set" and "-e write=set" when read and write sets intersect. * Fixed build on systems where struct sigaction has no sa_restorer member. * Fixed build with uclibc and musl libc. * Portability * Linux kernel >= 2.5.46 is required. Older versions without a decent PTRACE_SETOPTIONS support will not work. * On mips, linux kernel >= 2.6.15 is required. Older versions without a decent PTRACE_GETREGS support will not work. * On s390 and s390x, linux kernel >= 2.6.27 is required. Older versions without a decent PTRACE_GETREGSET support will not work. Noteworthy changes in release 4.9 (2014-08-15) ============================================== * Changes in behavior * Disabled OABI support on ARM EABI systems by default, added --enable-arm-oabi option to enable it at configure time. * Improvements * Added experimental -k option to print stack trace after each traced syscall. * Added -w option to produce stats on syscall latency. (addresses Debian bug #457497). * Added ARC architecture support. * Added PTRACE_GETREGS API support on PowerPC. * Enhanced Bionic libc and musl libc support. * Enhanced tracing of x86 personality processes on x86_64 and x32. * Enhanced tracing of ARM personality processes on AArch64. * Enhanced 32/64bit personality detection on PowerPC. * Implemented decoding of add_key, ioprio_get, ioprio_set, kexec_load, keyctl, renameat2, and request_key syscalls. * Robustified decoding of select, pselect, and io_submit syscalls. * Enhanced decoding of delete_module, fanotify_init, fanotify_mark, fcntl, setdomainname, sethostname, setns, and sync_file_range syscalls. * Enhanced decoding of signal bitmasks. * Enhanced decoding of file descriptors. * Enhanced siginfo_t decoding. * Enhanced PF_NETLINK decoding. * Updated CLOCK_* constants (addresses Fedora bug #1088455). * Added new syscall entries to match Linux 3.16. * Bug fixes * Added shmat and shmdt to the set of memory mapping related syscalls. * Fixed detaching from stopped processes. * Fixed fanotify_mark decoding on 32bit architectures. * Fixed offset decoding in preadv and pwritev syscalls. * Fixed select decoding for glibc in _FORTIFY_SOURCE mode. * Fixed decoding of epoll_ctl syscall with EPOLL_CTL_DEL argument. * Fixed build when and conflict (addresses Fedora bug #993384). * Miscellaneous corrections in the manual page. (Addresses Debian bug #725987). Noteworthy changes in release 4.8 (2013-06-03) ============================================== * Changes in behavior * In case of normal strace termination, when the trace output is redirected to a pipe, strace now closes it and waits for the pipe process termination before exit. * Improvements * Implemented tracing using PTRACE_SEIZE API (when available). * Implemented more reliable PTRACE_GETREGSET-based process personality detection on x86-64 and x32 (when available). * Added -e trace=memory option for tracing memory mapping related syscalls. * Documented -b option. * Allowed exit status messages to be suppressed by giving -q option twice. * Added AArch64 architecture support (addresses Debian bug #693074 and Fedora bug #969858). * Added support for OpenRISC 1000, Meta, and Xtensa architectures. * Added tilegx personality support for Tile. * Enhanced support of NOMMU architectures. * Enhanced decoding of getdents, mmap, perf_event_open, ptrace, and quotactl syscalls. * Added new syscall entries to match Linux 3.9. * Regenerated the list of common ioctl names from Linux 3.9. * Updated the list of errno constants. * Updated lists of AF_*, MADV_*, MAP_*, MSG_*, MS_*, PF_*, PR_*, PTRACE_O_*, and TCP_* constants. * Implemented decoding of UBI ioctls. * Removed redundant "*32" ioctl names. * Bug fixes * Fixed ERESTARTNOINTR leaking to userspace on ancient kernels (addresses Fedora bug #659382). * Fixed kernel release string parsing (addresses Debian bug #702309). * Fixed decoding of *xattr syscalls (addresses Fedora bug #885233). * Fixed handling of files with 64-bit inode numbers by 32-bit strace (addresses Fedora bug #912790). * Fixed tracing forks on SPARC. * Fixed decoding of fadvise64, fallocate, ftruncate64, io_submit, pread, preadv, pwrite, pwritev, readahead, sigaltstack, sync_file_range, sysctl, and truncate64 syscalls. * Fixed categories of multiple syscalls on most of supported architectures. * Fixed decoding of non-native 32-bit personality recv[m]msg syscalls. * Fixed decoding of multiple 32-bit personality syscalls on x32. * Fixed decoding of long long syscall arguments on ARM, MIPS/o32, PowerPC, S390x, and Tile architectures. * Fixed semtimedop decoding on S390x. * Fixed sram_alloc decoding on Blackfin. * Fixed build when process_vm_readv is a stab. * Fixed build with older versions of libaio.h. Noteworthy changes in release 4.7 (2012-05-02) ============================================== * Changes in behavior * strace no longer suspends waitpid until there is a child for waitpid'ing process to collect status from. * strace no longer detaches from a tracee which is supposed to be going to die. * strace now issues a new message: "+++ exited with EXITCODE +++" which shows exact moment strace got exit notification, analogous to existing "+++ killed by SIG +++" message. * Improvements * Added x32 personality support (x86_64 architecture). * Added -y and -P options to print file descriptor paths and filter by those paths. * Added -I option to control strace interactivity. * Allowed -p option to take comma or whitespace-separated list of PIDs. * Added strace_log_merge script helper to merge timestamped "strace -ff" log files. * Implemented decoding of clock_adjtime, get_robust_list, migrate_pages, preadv, prlimit64, process_vm_readv, process_vm_writev, pwritev, recvmmsg, recvmsg, rt_tgsigqueueinfo, sendmmsg, setns, set_robust_list, sched_rr_get_interval, splice, syslog, tee and vmsplice syscalls. * Enhanced decoding of capget, capset, getrlimit, flistxattr, io_submit, listxattr, setrlimit and swapon syscalls. * Implemented decoding of loop and mtd ioctls. * Added syscall entries for new linux syscalls. * Added syscall entries for direct socket system calls on powerpc. * Updated the list of errno constants. * Updated lists of MSG_*, STA_*, and TCP_* constants. * Regenerated the list of ioctl names from Linux 3.3. * Enhanced switching between processes with different personalities. * Enhanced signals reporting by using short signal names. * Made ERESTART* messages more descriptive. * Made parsing of numbers from strings more robust. * Added support for compat_statfs64 and statfs64.f_flags. * Changed read of data blocks to use single process_vm_readv syscall (when available) instead of several PTRACE_PEEKDATA operations. * Changed read of registers on x86 and x86-64 to use single PTRACE_GETREGS operation instead of several PTRACE_PEEKUSER operations. * Applied various optimizations to make strace work faster. * Bug fixes * Implemented proper handling of real SIGTRAPs on kernels supporting PTRACE_O_TRACESYSGOOD. (Addresses Fedora bug #162774). * Fixed sockaddr_un.sun_path name in decoded output. (Addresses Debian bug #554946). * Fixed to avoid potential core file clobbering on exit. (Addresses Debian bug #656398). * Fixed a typo in documentation. (Addresses Debian bug #653309). * Fixed decoding of timer id returned by timer_create. * Fixed epoll_create1, epoll_wait and epoll_pwait decoding. * Fixed *at syscalls flags decoding. * Fixed ARM EABI 64-bit syscall's arguments decoding. * Fixed semtimedop decoding on s390. * Fixed osf_sigprocmask decoding on alpha. * Fixed ipc and socket subcall decoding on several architectures. * Corrected syscall entries for epoll_pwait, epoll_create, epoll_ctl, epoll_wait, mincore, mlockall, prctl, reboot, sendfile, sendfile64, sendmsg, sgetmask, ssetmask, swapon, tgkill and tkill syscalls. * Corrected io_* syscall entries on ARM. * Fixed PID prefix printing in "strace -oLOG -ff -p1 -p2 -p3" case. * Fixed logging of unfinished lines in "strace -oLOG -ff" case. * Fixed build when libaio-devel is not available. * Fixed configure checks for PTRACE_* constants. * Fixed compilation warnings remained on several architectures. * Portability * Removed all non-Linux code. After years of neglect, that dead code just hampered further strace development. * Linux kernel >= 2.6.18 is recommended. Older versions might still work but they haven't been thoroughly tested with this release. Noteworthy changes in release 4.6 (2011-03-15) ============================================== * Changes in behavior * Print diagnostic information about changes in personality mode to standard error instead of standard output. * Improvements * Implemented a new method of following clone, fork, and vfork syscalls using the Linux kernel's explicit facilities for tracing creation of threads and child processes. * Implemented CLONE_PARENT and CLONE_UNTRACED flags handling. * Implemented decoding of TLS syscalls on m68k. * Implemented biarch support on powerpc64. * Implemented biarch support for getrlimit() and setrlimit(). * Implemented decoding of struct ucred in getsockopt SO_PEERCRED. * Implemented SOL_SCTP socket options decoding. * Added HDIO_* ioctl names. (Addresses Debian bug #450953). * Added LOOP_* ioctl names. * Updated lists of CLOCK_*, CLONE_*, MS_*, and SOL_* constants to match Linux 2.6.37. * Updated the list of IPPROTO_* constants to match netinet/in.h. * Implemented decoding of HDIO_* and BLK* ioctls. * Added MicroBlaze architecture support. * Added new syscall entries to match Linux 2.6.37. * Regenerated list of ioctl names from Linux 2.6.37. * Enhanced signal notification decoding. * Documented -C and -D options. * Bug fixes * Fixed fetching syscall arguments on m68k. * Fixed an error when judging whether a process has children. * Fixed get/set_robust_list syscall numbers for powerpc. * Fixed a corner case in printing clone flags. * Fixed cross-compiling issues. * Fixed build issues on powerpc64, SH and SPARC. * Fixed syscall flags of fstatat*, mmap, mmap2, fadvise64*, swapoff, fgetxattr, flistxattr, fremovexattr, epoll_create, fallocate, fanotify_init, and fanotify_mark syscalls. * Fixed decoding of get[ug]id, gete[ug]id and setfs[ug]id return values. * Fixed biarch support in IO dumping. * Fixed raw exit_group decoding. * Fixed decoding of file descriptors on 64-bit architectures. * Fixed a corner case in waitpid handling. (Addresses Red Hat bug #663547). * Fixed stat64 decoding on mips (Addresses Debian bug #599028). * Fixed misleading italics in the manual page. (Addresses Debian bug #589323). Noteworthy changes in release 4.5.20 (2010-04-13) ================================================= * Improvements * Implemented decoding of new linux syscalls: inotify_init1, recvmmsg. * Implemented basic decoding of new linux syscalls: preadv, pwritev, rt_tgsigqueueinfo, perf_event_open. * Enhanced decoding of recently added syscalls on non-x86 architectures by replacing a bare decoder with elaborate parsers enabled earlier for x86/x86-64. * Implemented -C option to combine regular and -c output. (Addresses Debian bug #466196) * Enhanced decoding of mbind and mremap syscalls. * Enhanced SOL_PACKET socket options decoding. * Regenerated list of ioctl names from linux 2.6.33. * Added TILE architecture support. * Bug fixes * Fixed build with Linux kernel headers 2.6.32-rc5+. (Addresses Debian bug #560516 and Fedora bug #539044) * Fixed build on mips. * Fixed handling of Linux systems without struct statfs64. * Fixed reporting signal mask by sigreturn on powerpc. * Fixed potential stack buffer overflow in select decoder. (Addresses Fedora bug #556678) * Corrected msgsnd indirect ipccall decoding. * Corrected decoding of 64bit syscalls. (Addresses Debian bug #570603) * Corrected getsockopt decoding on architectures where sizeof(long) > sizeof(int). (Addresses Debian bug #494844) * Corrected decoding of epoll_pwait. (Addresses Debian bug #513014) * Corrected handling of killed threads. Noteworthy changes in release 4.5.19 (2009-10-21) ================================================= * Changes in behavior * When command exits, strace now exits with the same exit status. If command is terminated by a signal, strace terminates itself with the same signal, so that strace can be used as a wrapper process transparent to the invoking parent process. When using -p option, the exit status of strace is zero unless there was an unexpected error in doing the tracing. (Addresses Fedora bug #105371 and Debian bug #37665) * Improvements * Implemented decoding of new Linux syscalls: accept4, dup3, epoll_create1, eventfd2, inotify_init1, pipe2, signalfd4. * Implemented decoding of socket type flags introduced in Linux 2.6.27. * Implemented decoding of accept4 socketcall. * Enhanced prctl decoding. * Enhanced nanosleep decoding. * Enhanced ptrace decoding. * Enhanced futex decoding. * Enhanced CAP_* decoding. * Enhanced SIOCS* ioctls decoding. * Enhanced fcntl F_* flags decoding. * Enhanced semop/semtimedop decoding. * Updated ARM architecture support. * Added Blackfin architecture support. * Added AVR32 architecture support. * Added CRIS architecture support. * Made strace detect when traced process suddenly disappeared. * Bug fixes * Fixed syscall numbers for tee and sync_file_range. (Addresses Debian bug #503124) * Fixed several bugs in strings decoder, including potential heap memory corruption. (Addresses Fedora bugs #470529, #478324 and #511035) * Marked sendfile(2) as a network syscall. (Addresses Debian bug #509499) * Fixed accept(2) decoding. (Addresses Debian bug #507573) * Fixed sigtimedwait(2) decoding. * Fixed build on ARM EABI. (Addresses Debian bugs #520084 and #535564, and Fedora bug #507576) * Fixed display of 32-bit fcntl(F_SETLK) on 64-bit architectures. (Addresses Red Hat bug #471169) * Fixed display of 32-bit argv array on 64-bit architectures. (Addresses Fedora bug #519480) * Fixed display of 32-bit struct sigaction on 64-bit architectures. * Fixed HPPA architecture support. (Addresses Debian bugs #437928 and #546619) Changes in 4.5.18 ============== * Bug fixes. * Support new Linux/PPC system call subpage_prot and PROT_SAO flag. * In sigaction system call, display sa_flags value along with SIG_DFL/SIG_IGN. Changes in 4.5.17 ============== * Many bug fixes. * -F is now deprecated, -f has traced vfork too on Linux for a long time now. * Print O_CLOEXEC, MSG_CMSG_CLOEXEC flag bits. * Improved output for prctl system call on Linux. * Improved support for Linux/ARM. * SA_NOMASK is now spelled SA_NODEFER, and SA_ONESHOT is spelled SA_RESETHAND. Changes in 4.5.16 ============== * Bug fixes. * Improved output for delete_module, futex, and mbind system calls on Linux. * Improved output for SG_IO ioctls on Linux. * Support new Linux system calls move_pages, utimensat, signalfd, timerfd, eventfd, getcpu, epoll_pwait. Changes in 4.5.15 ============== * Bug fixes. * Several biarch improvements. * Improved output for adjtimex, sysctl, quotactl, mount, umount. * Support new Linux system calls *at, inotify*, pselect6, ppoll and unshare. Changes in 4.5.14 ============== * Bug fixes. * Accept numeric system calls in -e. Changes in 4.5.13 ============== * Bug fixes. * Introduce "-e trace=desc". Changes in 4.5.12 ============== * Bug fixes. * Better x86-64 support for IA32 processes. * Update PowerPC system calls. * Better printing for Linux aio system calls. Changes in 4.5.11 ============== * Quick fix release for build issues. * One fix for Linux/ARM system call table. Changes in 4.5.10 ============== * Bug fixes. * Print fault address for SIGSEGV/SIGBUS signals when available. Changes in 4.5.9 ============== * Bug fixes. * Improve socket ioctl printing. * Update Linux/IA64 syscall list. * Fix Linux/x86-64 syscall argument extraction for 32-bit processes. * Improve mount flags printing. * Support symbolic printing of x86_64 arch_prctl parameters. Changes in 4.5.8 ============== * Bug fixes. * Update syscall tables for Alpha, ARM, HPPA. * Support new Linux syscalls mbind, set_mempolicy, get_mempolicy, waitid. * Support Linux syscalls fadvise64, fadvise64_64, and epoll_*. * Improve ioctl command name matching. * Print RTC_* ioctl structure contents. * Support newer RLIMIT_* values. * Print struct cmsghdr details in sendmsg. Changes in 4.5.7 ============== * Bug fixes. * Print attribute values in *xattr system calls on Linux. * Include pread and pwrite calls in -e read and -e write tracing. * Update SO_* and IP_* value lists and add IPV6_* values for socket options. * Print clock_t values symbolically in Linux clock_* system calls. Changes in 4.5.6 ============== * Bug fixes, Linux ioctl updates. * David Miller contributed support for Linux/SPARC64. Changes in 4.5.5 ============== * Just bug fixes. Changes in 4.5.4 ============== * Update Linux ioctl lists. * Update PF_* and AF_* value lists. * The 4.5.3 -p behavior for NPTL threads applies only under -f, and got fixed. Changes in 4.5.3 ============== * Bug fixes. * On Linux using NPTL threads, -p will now attach to all threads in a process. * Handle new mq_* system calls in Linux 2.6.6 and later. Changes in 4.5.2 ============== * Bug fixes. * Report some new VM_* bit values on Linux. * Better output for Linux sched_* system calls. Changes in 4.5.1 ============== * Bug fixes. * Display multiple ioctl name matches on Linux. Changes in 4.5 ============== * New port to AMD's x86-64 architecture. One strace binary can handle both new x86-64 and old i386 processes. * Fixed support for LFS64 calls. * New switch -E to add/remove environment variables for the command. * Merged s390/s390x port. * Trace an unbounded number of processes. * Handle numerous new system calls in Linux 2.5, and new threads semantics. * Fixed bugs with attach/detach leaving things stopped. * Fixed traced process seeing ECHILD despite live, traced children in waitpid calls with WNOHANG. * Stuart Menefy contributed a port to Linux/SH. * Stephen Thomas contributed a port to Linux/SH64. * Many other bug fixes. Changes in 4.4 ============== * Fix Linux/ia64 support, looks like someone renamed a few things on us * Fix the ioctl setup for Linux, turned out it did not really work. Improve the ioctl extractor as well so we decode some more ones. Changes in 4.3.1 ================ * compile fixes for Linux/mips Changes in 4.3 ============== * Linux ia64 and hppa ports added * The usual Linux syscall updates (includes 32bit uid/gid support), * Linux ioctl list updated * Support IPv6 scope ids * FreeBSD/i386 port added * UnixWare and Solaris updates * Better support for tracing multithreaded processes in Linux Changes in 4.2 ============== * Compiles on glibc2.0 systems again * Linux/S390 port added * The usual Linux syscall updates * we can follow fork on arm now Changes in 4.1 ================ * Linux/MIPS port added * Lots of Linux updates again * Improved IPv6 support * Add strace-graph Changes in 4.0.1 ================ * Minor bugfixes * Compiles on glibc2.0 systems again Changes in 4.0 ============== * Get stat structure properly on Linux 64bit archs * Personalities work again * Compile correctly on SunOS again * IRIX64 updates * Solaris updates Changes in 3.99.1 ================= * Linux (ultra)sparc fixes * Linux alpha fixes * Minor cleanups Changes in 3.99 =============== * New maintainer * add support for more Linux architectures (powerpc, sparc, arm) * support lots more Linux syscalls * fix signal handling * add IPX and IPIP support * check stray syscall after execv * fix hanging children Changes in version 3.1 ====================== * Irix5 is supported * Linux 68k is supported * Linux alpha is supported * configure is upgraded to autoconf 2.x * using -f in combination with -e now works correctly * output can be piped to a program * tracing setuid programs works better * it is now reasonable to install strace setuid to root in some circumstances * new useful tracing names like file and process to trace whole classes of system calls, e.g. -efile traces all system calls that take a file name as an argument * IPC calls on SunOS 4.1.x are decoded * Linux program memory is reliably dereferenced * Linux decodes at least the name of all syscalls as of pre2.0.4 * various cosmetic changes and bug fixes Changes from versions 2.x to version 3.0 ======================================== * filename arguments are neither abbreviated nor stringified * string arguments are now true C strings using octal instead of hex by default * preprocessor constants are never shortened (e.g. was RDONLY => now O_RDONLY) * by default the output for multiple processes now goes into one file * all structures, vectors, bitsets, etc. use consistent output formats * the -c option now means count calls, -i does what the old -c used to do New Features in version 3.0 =========================== * non-ascii strings can be optionally printed entirely in hex * the output format is readable when multiple processes are generating output * exit values are printed in an alignment column * is is possible to suppress messages about attaching and detaching * various tracing features can be enabled on a per syscall/signal/desc basis * selective tracing of syscalls * selective printing of syscall structures * selective abbreviation of long structures on a per syscall basis * selective printing of raw syscall arguments and results * selective tracing of signals * selective dumping of all I/O read from file descriptors * selective dumping of all I/O written to file descriptors * optional counting of time, calls, and errors for each syscall