# The Art Of Scripting HTTP Requests Using Curl
## Background
This document assumes that you are familiar with HTML and general networking.
The increasing amount of applications moving to the web has made "HTTP
Scripting" more frequently requested and wanted. To be able to automatically
extract information from the web, to fake users, to post or upload data to
web servers are all important tasks today.
Curl is a command line tool for doing all sorts of URL manipulations and
transfers, but this particular document will focus on how to use it when
doing HTTP requests for fun and profit. I will assume that you know how to
invoke `curl --help` or `curl --manual` to get basic information about it.
Curl is not written to do everything for you. It makes the requests, it gets
the data, it sends data and it retrieves the information. You probably need
to glue everything together using some kind of script language or repeated
manual invokes.
## The HTTP Protocol
HTTP is the protocol used to fetch data from web servers. It is a simple
protocol that is built upon TCP/IP. The protocol also allows information to
get sent to the server from the client using a few different methods, as will
be shown here.
HTTP is plain ASCII text lines being sent by the client to a server to
request a particular action, and then the server replies a few text lines
before the actual requested content is sent to the client.
The client, curl, sends an HTTP request. The request contains a method (like
GET, POST, HEAD etc), a number of request headers and sometimes a request
body. The HTTP server responds with a status line (indicating if things went
well), response headers and most often also a response body. The "body" part
is the plain data you requested, like the actual HTML or the image etc.
## See the Protocol
Using curl's option [`--verbose`](https://curl.se/docs/manpage.html#-v)
(`-v` as a short option) will display what kind of commands curl sends to the
server, as well as a few other informational texts.
`--verbose` is the single most useful option when it comes to debug or even
understand the curl<->server interaction.
Sometimes even `--verbose` is not enough. Then
[`--trace`](https://curl.se/docs/manpage.html#-trace) and
[`--trace-ascii`](https://curl.se/docs/manpage.html#--trace-ascii)
offer even more details as they show **everything** curl sends and
receives. Use it like this:
curl --trace-ascii debugdump.txt http://www.example.com/
## See the Timing
Many times you may wonder what exactly is taking all the time, or you just
want to know the amount of milliseconds between two points in a transfer. For
those, and other similar situations, the
[`--trace-time`](https://curl.se/docs/manpage.html#--trace-time) option
is what you need. It will prepend the time to each trace output line:
curl --trace-ascii d.txt --trace-time http://example.com/
## See the Response
By default curl sends the response to stdout. You need to redirect it
somewhere to avoid that, most often that is done with `-o` or `-O`.
# URL
## Spec
The Uniform Resource Locator format is how you specify the address of a
particular resource on the Internet. You know these, you have seen URLs like
https://curl.se or https://example.com a million times. RFC 3986 is the
canonical spec. And yeah, the formal name is not URL, it is URI.
## Host
The host name is usually resolved using DNS or your /etc/hosts file to an IP
address and that is what curl will communicate with. Alternatively you specify
the IP address directly in the URL instead of a name.
For development and other trying out situations, you can point to a different
IP address for a host name than what would otherwise be used, by using curl's
[`--resolve`](https://curl.se/docs/manpage.html#--resolve) option:
curl --resolve www.example.org:80:127.0.0.1 http://www.example.org/
## Port number
Each protocol curl supports operates on a default port number, be it over TCP
or in some cases UDP. Normally you do not have to take that into
consideration, but at times you run test servers on other ports or
similar. Then you can specify the port number in the URL with a colon and a
number immediately following the host name. Like when doing HTTP to port
1234:
curl http://www.example.org:1234/
The port number you specify in the URL is the number that the server uses to
offer its services. Sometimes you may use a proxy, and then you may
need to specify that proxy's port number separately from what curl needs to
connect to the server. Like when using an HTTP proxy on port 4321:
curl --proxy http://proxy.example.org:4321 http://remote.example.org/
## User name and password
Some services are setup to require HTTP authentication and then you need to
provide name and password which is then transferred to the remote site in
various ways depending on the exact authentication protocol used.
You can opt to either insert the user and password in the URL or you can
provide them separately:
curl http://user:password@example.org/
or
curl -u user:password http://example.org/
You need to pay attention that this kind of HTTP authentication is not what
is usually done and requested by user-oriented websites these days. They tend
to use forms and cookies instead.
## Path part
The path part is just sent off to the server to request that it sends back
the associated response. The path is what is to the right side of the slash
that follows the host name and possibly port number.
# Fetch a page
## GET
The simplest and most common request/operation made using HTTP is to GET a
URL. The URL could itself refer to a web page, an image or a file. The client
issues a GET request to the server and receives the document it asked for.
If you issue the command line
curl https://curl.se
you get a web page returned in your terminal window. The entire HTML document
that that URL holds.
All HTTP replies contain a set of response headers that are normally hidden,
use curl's [`--include`](https://curl.se/docs/manpage.html#-i) (`-i`)
option to display them as well as the rest of the document.
## HEAD
You can ask the remote server for ONLY the headers by using the
[`--head`](https://curl.se/docs/manpage.html#-I) (`-I`) option which
will make curl issue a HEAD request. In some special cases servers deny the
HEAD method while others still work, which is a particular kind of annoyance.
The HEAD method is defined and made so that the server returns the headers
exactly the way it would do for a GET, but without a body. It means that you
may see a `Content-Length:` in the response headers, but there must not be an
actual body in the HEAD response.
## Multiple URLs in a single command line
A single curl command line may involve one or many URLs. The most common case
is probably to just use one, but you can specify any amount of URLs. Yes
any. No limits. You will then get requests repeated over and over for all the
given URLs.
Example, send two GET requests:
curl http://url1.example.com http://url2.example.com
If you use [`--data`](https://curl.se/docs/manpage.html#-d) to POST to
the URL, using multiple URLs means that you send that same POST to all the
given URLs.
Example, send two POSTs:
curl --data name=curl http://url1.example.com http://url2.example.com
## Multiple HTTP methods in a single command line
Sometimes you need to operate on several URLs in a single command line and do
different HTTP methods on each. For this, you will enjoy the
[`--next`](https://curl.se/docs/manpage.html#-:) option. It is basically
a separator that separates a bunch of options from the next. All the URLs
before `--next` will get the same method and will get all the POST data
merged into one.
When curl reaches the `--next` on the command line, it will sort of reset the
method and the POST data and allow a new set.
Perhaps this is best shown with a few examples. To send first a HEAD and then
a GET:
curl -I http://example.com --next http://example.com
To first send a POST and then a GET:
curl -d score=10 http://example.com/post.cgi --next http://example.com/results.html
# HTML forms
## Forms explained
Forms are the general way a website can present an HTML page with fields for
the user to enter data in, and then press some kind of 'OK' or 'Submit'
button to get that data sent to the server. The server then typically uses
the posted data to decide how to act. Like using the entered words to search
in a database, or to add the info in a bug tracking system, display the
entered address on a map or using the info as a login-prompt verifying that
the user is allowed to see what it is about to see.
Of course there has to be some kind of program on the server end to receive
the data you send. You cannot just invent something out of the air.
## GET
A GET-form uses the method GET, as specified in HTML like:
```html
```
In your favorite browser, this form will appear with a text box to fill in
and a press-button labeled "OK". If you fill in '1905' and press the OK
button, your browser will then create a new URL to get for you. The URL will
get `junk.cgi?birthyear=1905&press=OK` appended to the path part of the
previous URL.
If the original form was seen on the page `www.example.com/when/birth.html`,
the second page you will get will become
`www.example.com/when/junk.cgi?birthyear=1905&press=OK`.
Most search engines work this way.
To make curl do the GET form post for you, just enter the expected created
URL:
curl "http://www.example.com/when/junk.cgi?birthyear=1905&press=OK"
## POST
The GET method makes all input field names get displayed in the URL field of
your browser. That is generally a good thing when you want to be able to
bookmark that page with your given data, but it is an obvious disadvantage if
you entered secret information in one of the fields or if there are a large
amount of fields creating a long and unreadable URL.
The HTTP protocol then offers the POST method. This way the client sends the
data separated from the URL and thus you will not see any of it in the URL
address field.
The form would look similar to the previous one:
```html
```
And to use curl to post this form with the same data filled in as before, we
could do it like:
curl --data "birthyear=1905&press=%20OK%20" http://www.example.com/when/junk.cgi
This kind of POST will use the Content-Type
`application/x-www-form-urlencoded` and is the most widely used POST kind.
The data you send to the server MUST already be properly encoded, curl will
not do that for you. For example, if you want the data to contain a space,
you need to replace that space with `%20`, etc. Failing to comply with this will
most likely cause your data to be received wrongly and messed up.
Recent curl versions can in fact url-encode POST data for you, like this:
curl --data-urlencode "name=I am Daniel" http://www.example.com
If you repeat `--data` several times on the command line, curl will
concatenate all the given data pieces - and put a `&` symbol between each
data segment.
## File Upload POST
Back in late 1995 they defined an additional way to post data over HTTP. It
is documented in the RFC 1867, why this method sometimes is referred to as
RFC1867-posting.
This method is mainly designed to better support file uploads. A form that
allows a user to upload a file could be written like this in HTML:
```html
```
This clearly shows that the Content-Type about to be sent is
`multipart/form-data`.
To post to a form like this with curl, you enter a command line like:
curl --form upload=@localfilename --form press=OK [URL]
## Hidden Fields
A common way for HTML based applications to pass state information between
pages is to add hidden fields to the forms. Hidden fields are already filled
in, they are not displayed to the user and they get passed along just as all
the other fields.
A similar example form with one visible field, one hidden field and one
submit button could look like:
```html
```
To POST this with curl, you will not have to think about if the fields are
hidden or not. To curl they are all the same:
curl --data "birthyear=1905&press=OK&person=daniel" [URL]
## Figure Out What A POST Looks Like
When you are about to fill in a form and send it to a server by using curl
instead of a browser, you are of course interested in sending a POST exactly
the way your browser does.
An easy way to get to see this, is to save the HTML page with the form on
your local disk, modify the 'method' to a GET, and press the submit button
(you could also change the action URL if you want to).
You will then clearly see the data get appended to the URL, separated with a
`?`-letter as GET forms are supposed to.
# HTTP upload
## PUT
Perhaps the best way to upload data to an HTTP server is to use PUT. Then
again, this of course requires that someone put a program or script on the
server end that knows how to receive an HTTP PUT stream.
Put a file to an HTTP server with curl:
curl --upload-file uploadfile http://www.example.com/receive.cgi
# HTTP Authentication
## Basic Authentication
HTTP Authentication is the ability to tell the server your username and
password so that it can verify that you are allowed to do the request you are
doing. The Basic authentication used in HTTP (which is the type curl uses by
default) is **plain text** based, which means it sends username and password
only slightly obfuscated, but still fully readable by anyone that sniffs on
the network between you and the remote server.
To tell curl to use a user and password for authentication:
curl --user name:password http://www.example.com
## Other Authentication
The site might require a different authentication method (check the headers
returned by the server), and then
[`--ntlm`](https://curl.se/docs/manpage.html#--ntlm),
[`--digest`](https://curl.se/docs/manpage.html#--digest),
[`--negotiate`](https://curl.se/docs/manpage.html#--negotiate) or even
[`--anyauth`](https://curl.se/docs/manpage.html#--anyauth) might be
options that suit you.
## Proxy Authentication
Sometimes your HTTP access is only available through the use of an HTTP
proxy. This seems to be especially common at various companies. An HTTP proxy
may require its own user and password to allow the client to get through to
the Internet. To specify those with curl, run something like:
curl --proxy-user proxyuser:proxypassword curl.se
If your proxy requires the authentication to be done using the NTLM method,
use [`--proxy-ntlm`](https://curl.se/docs/manpage.html#--proxy-ntlm), if
it requires Digest use
[`--proxy-digest`](https://curl.se/docs/manpage.html#--proxy-digest).
If you use any one of these user+password options but leave out the password
part, curl will prompt for the password interactively.
## Hiding credentials
Do note that when a program is run, its parameters might be possible to see
when listing the running processes of the system. Thus, other users may be
able to watch your passwords if you pass them as plain command line
options. There are ways to circumvent this.
It is worth noting that while this is how HTTP Authentication works, many
websites will not use this concept when they provide logins etc. See the Web
Login chapter further below for more details on that.
# More HTTP Headers
## Referer
An HTTP request may include a 'referer' field (yes it is misspelled), which
can be used to tell from which URL the client got to this particular
resource. Some programs/scripts check the referer field of requests to verify
that this was not arriving from an external site or an unknown page. While
this is a stupid way to check something so easily forged, many scripts still
do it. Using curl, you can put anything you want in the referer-field and
thus more easily be able to fool the server into serving your request.
Use curl to set the referer field with:
curl --referer http://www.example.come http://www.example.com
## User Agent
Similar to the referer field, all HTTP requests may set the User-Agent
field. It names what user agent (client) that is being used. Many
applications use this information to decide how to display pages. Silly web
programmers try to make different pages for users of different browsers to
make them look the best possible for their particular browsers. They usually
also do different kinds of JavaScript etc.
At times, you will see that getting a page with curl will not return the same
page that you see when getting the page with your browser. Then you know it
is time to set the User Agent field to fool the server into thinking you are
one of those browsers.
To make curl look like Internet Explorer 5 on a Windows 2000 box:
curl --user-agent "Mozilla/4.0 (compatible; MSIE 5.01; Windows NT 5.0)" [URL]
Or why not look like you are using Netscape 4.73 on an old Linux box:
curl --user-agent "Mozilla/4.73 [en] (X11; U; Linux 2.2.15 i686)" [URL]
## Redirects
## Location header
When a resource is requested from a server, the reply from the server may
include a hint about where the browser should go next to find this page, or a
new page keeping newly generated output. The header that tells the browser to
redirect is `Location:`.
Curl does not follow `Location:` headers by default, but will simply display
such pages in the same manner it displays all HTTP replies. It does however
feature an option that will make it attempt to follow the `Location:`
pointers.
To tell curl to follow a Location:
curl --location http://www.example.com
If you use curl to POST to a site that immediately redirects you to another
page, you can safely use
[`--location`](https://curl.se/docs/manpage.html#-L) (`-L`) and
`--data`/`--form` together. Curl will only use POST in the first request, and
then revert to GET in the following operations.
## Other redirects
Browsers typically support at least two other ways of redirects that curl
does not: first the html may contain a meta refresh tag that asks the browser
to load a specific URL after a set number of seconds, or it may use
JavaScript to do it.
# Cookies
## Cookie Basics
The way the web browsers do "client side state control" is by using
cookies. Cookies are just names with associated contents. The cookies are
sent to the client by the server. The server tells the client for what path
and host name it wants the cookie sent back, and it also sends an expiration
date and a few more properties.
When a client communicates with a server with a name and path as previously
specified in a received cookie, the client sends back the cookies and their
contents to the server, unless of course they are expired.
Many applications and servers use this method to connect a series of requests
into a single logical session. To be able to use curl in such occasions, we
must be able to record and send back cookies the way the web application
expects them. The same way browsers deal with them.
## Cookie options
The simplest way to send a few cookies to the server when getting a page with
curl is to add them on the command line like:
curl --cookie "name=Daniel" http://www.example.com
Cookies are sent as common HTTP headers. This is practical as it allows curl
to record cookies simply by recording headers. Record cookies with curl by
using the [`--dump-header`](https://curl.se/docs/manpage.html#-D) (`-D`)
option like:
curl --dump-header headers_and_cookies http://www.example.com
(Take note that the
[`--cookie-jar`](https://curl.se/docs/manpage.html#-c) option described
below is a better way to store cookies.)
Curl has a full blown cookie parsing engine built-in that comes in use if you
want to reconnect to a server and use cookies that were stored from a
previous connection (or hand-crafted manually to fool the server into
believing you had a previous connection). To use previously stored cookies,
you run curl like:
curl --cookie stored_cookies_in_file http://www.example.com
Curl's "cookie engine" gets enabled when you use the
[`--cookie`](https://curl.se/docs/manpage.html#-b) option. If you only
want curl to understand received cookies, use `--cookie` with a file that
does not exist. Example, if you want to let curl understand cookies from a
page and follow a location (and thus possibly send back cookies it received),
you can invoke it like:
curl --cookie nada --location http://www.example.com
Curl has the ability to read and write cookie files that use the same file
format that Netscape and Mozilla once used. It is a convenient way to share
cookies between scripts or invokes. The `--cookie` (`-b`) switch
automatically detects if a given file is such a cookie file and parses it,
and by using the `--cookie-jar` (`-c`) option you will make curl write a new
cookie file at the end of an operation:
curl --cookie cookies.txt --cookie-jar newcookies.txt \
http://www.example.com
# HTTPS
## HTTPS is HTTP secure
There are a few ways to do secure HTTP transfers. By far the most common
protocol for doing this is what is generally known as HTTPS, HTTP over
SSL. SSL encrypts all the data that is sent and received over the network and
thus makes it harder for attackers to spy on sensitive information.
SSL (or TLS as the current version of the standard is called) offers a set of
advanced features to do secure transfers over HTTP.
Curl supports encrypted fetches when built to use a TLS library and it can be
built to use one out of a fairly large set of libraries - `curl -V` will show
which one your curl was built to use (if any!). To get a page from an HTTPS
server, simply run curl like:
curl https://secure.example.com
## Certificates
In the HTTPS world, you use certificates to validate that you are the one
you claim to be, as an addition to normal passwords. Curl supports client-
side certificates. All certificates are locked with a pass phrase, which you
need to enter before the certificate can be used by curl. The pass phrase
can be specified on the command line or if not, entered interactively when
curl queries for it. Use a certificate with curl on an HTTPS server like:
curl --cert mycert.pem https://secure.example.com
curl also tries to verify that the server is who it claims to be, by
verifying the server's certificate against a locally stored CA cert
bundle. Failing the verification will cause curl to deny the connection. You
must then use [`--insecure`](https://curl.se/docs/manpage.html#-k)
(`-k`) in case you want to tell curl to ignore that the server cannot be
verified.
More about server certificate verification and ca cert bundles can be read in
the [`SSLCERTS` document](https://curl.se/docs/sslcerts.html).
At times you may end up with your own CA cert store and then you can tell
curl to use that to verify the server's certificate:
curl --cacert ca-bundle.pem https://example.com/
# Custom Request Elements
## Modify method and headers
Doing fancy stuff, you may need to add or change elements of a single curl
request.
For example, you can change the POST method to `PROPFIND` and send the data
as `Content-Type: text/xml` (instead of the default `Content-Type`) like
this:
curl --data "" --header "Content-Type: text/xml" \
--request PROPFIND example.com
You can delete a default header by providing one without content. Like you
can ruin the request by chopping off the `Host:` header:
curl --header "Host:" http://www.example.com
You can add headers the same way. Your server may want a `Destination:`
header, and you can add it:
curl --header "Destination: http://nowhere" http://example.com
## More on changed methods
It should be noted that curl selects which methods to use on its own
depending on what action to ask for. `-d` will do POST, `-I` will do HEAD and
so on. If you use the
[`--request`](https://curl.se/docs/manpage.html#-X) / `-X` option you
can change the method keyword curl selects, but you will not modify curl's
behavior. This means that if you for example use -d "data" to do a POST, you
can modify the method to a `PROPFIND` with `-X` and curl will still think it
sends a POST . You can change the normal GET to a POST method by simply
adding `-X POST` in a command line like:
curl -X POST http://example.org/
... but curl will still think and act as if it sent a GET so it will not send
any request body etc.
# Web Login
## Some login tricks
While not strictly just HTTP related, it still causes a lot of people
problems so here's the executive run-down of how the vast majority of all
login forms work and how to login to them using curl.
It can also be noted that to do this properly in an automated fashion, you
will most certainly need to script things and do multiple curl invokes etc.
First, servers mostly use cookies to track the logged-in status of the
client, so you will need to capture the cookies you receive in the
responses. Then, many sites also set a special cookie on the login page (to
make sure you got there through their login page) so you should make a habit
of first getting the login-form page to capture the cookies set there.
Some web-based login systems feature various amounts of JavaScript, and
sometimes they use such code to set or modify cookie contents. Possibly they
do that to prevent programmed logins, like this manual describes how to...
Anyway, if reading the code is not enough to let you repeat the behavior
manually, capturing the HTTP requests done by your browsers and analyzing the
sent cookies is usually a working method to work out how to shortcut the
JavaScript need.
In the actual `